Dynacord CL 1200

Prix TTC € 849

tous les produits Dynacord
dans la même gamme de prix

• Load Impedance : 2 Ω, 4 Ω, 8 Ω
• Max. Midband, Output Power, THD = 1%, 1kHz , Dual Channel : 2 Ω - 900W, 4 Ω - 600W, 8 Ω - 350W
• Rated Output Power, THD < 0,1%, 20Hz … 20kHz : 4 Ω - 500W, 8 Ω - 250W
• Max. Single Channel, Output Power, Dynamic Headroom, IHF-A : 2 Ω - 1450W, 4 Ω - 850W, 8 Ω - 450W
• Max. Single Channel, Output Power, Continuous, 1kHz : 2 Ω - 1200W, 4 Ω - 720W, 8 Ω - 410W
• Max. Bridged, Output Power, THD = 1%, 1kHz : 4 Ω - 1800W, 8 Ω - 1200W
• Maximum RMS Voltage Swing, THD = 1%, 1kHz : 62V
• Power Bandwith, ref. 1kHz, THD =1%, half power @ 4 ohms : 10Hz … 60kHz
• Voltage Gain, ref. 1kHz : 32,0 dB
• Input Sensitivity, at rated output power : +3,2 dBu (1,12 V rms)
• THD at rated output power, MBW = 80kHz, 1kHz : < 0,05%
• IMD-SMPTE, 60Hz, 7kHz : < 0,02%
• DIM 30, 3,15kHz, 15kHz : < 0,01%
• Maximum Input Level : +22 dBu (9,76 V rms)
• Crosstalk, ref. 1kHz, at rated output power : < -80 dB
• Frequency Response, ref. 1kHz (- 1dB) : 15Hz … 40kHz
• Input Impedance, active balanced : 20 kΩ
• Damping Factor, 1kHz : > 300
• Slew Rate : 30 V/μs
• Signal to Noise Ratio, Amplifier, A-weighted : 105,5 dB
• Output Noise, A-weighted : < -70 dB
• Output Stage Topology : Class H
• Power Requirements : 100V, 120V, 220V, 230V, 240 V; 50Hz … 60Hz (factory configured)
• Power Consumption 1/8 max., output power @ 4 ohms : 500W (Measured with 110% of reated mains voltage)
• Protections : Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
• Cooling : Front-to rear, 3-stage fans
• Ambient Temperature Limits : +5°C ... +40°C (40°F ... 105°F)
• Safety Class : I
• Dimensions (W x H x D) mm : 483 x 88,1 x 386,8
• Weight : 15 kg (33 lbs)
• Optional : Rear-rackmount 15,5\" D112930 (NRS 90262), Rear-rackmount 18\" D112933 (NRS 90264), LPN + Lo-Cut internal filter-card D112963 (NRS 90268)